400/33 kV · 250 MW
Sittingbourne BESS
Secondary-system detailed design, protection scheme, schematics, earthing studies and cable calculations.
Projects
Substation design, grid connections and power system studies delivered for clients in the UK and internationally.
United Kingdom
Detailed engineering for BESS, GIS and network reinforcement projects.
400/33 kV · 250 MW
Secondary-system detailed design, protection scheme, schematics, earthing studies and cable calculations.
400 kV
Primary 2D/3D detailed design, BIM coordination, above- and below-ground earthing layout engineering.
132 kV
Primary, secondary and civil detailed design for transformer reinforcement, upgraded from 30 MVA to 45 MVA.
International
Study scope and software selection depend on network characteristics, project requirements and applicable criteria.
Showing 26 of 26 projects
System studies: protection coordination, insulation coordination, arc-flash analysis, transient analysis and short-circuit analysis.
Protection coordination study of the transmission system.
PSSE with Python scripting; 380 kV protection scheme for ARAMCO.
Interconnection study to the C-62.82.1 standard.
DIgSILENT PowerFactory with dynamic analysis.
ETAP study with OE solutions; SAES-100, P-114, SEC SEEDS II and IEEE-SA-P3002.9.
Design and simulation using PSCAD.
Arc-flash analysis and protection coordination using CYME, per IEC-60255.
Design and grid-integration analysis using ETAP.
Wind integration study using DIgSILENT.
Power-system audit as per ISO 9001:2015.
Confidential project studies.
ETAP arc-flash and protection/coordination studies.
Relay calculation and setting study.
Relay coordination and arc-flash studies using ETAP.
Complete system studies using ETAP.
Insulation-coordination study using PSCAD.
Dynamic integration study using PSSE.
Fault analysis using ETAP 12.6, alongside distribution-network documentation.
Overcurrent relay schemes with under/over-voltage protection.
PSS SINCAL dynamic simulation and load-flow study for grid connection.
Insulation-coordination study using PSCAD.
Automated load-management system for PV-diesel hybrid power setup.
SCADA tender design for large pooling and distribution substations.
SCADA FEED for MV/LV electrical infrastructure.
SCADA readiness and automation integration projects.
Tell us about your substation, grid connection or study requirements and we will put the right engineers on it.
Discuss Your Project